Smoke Machine Vac-Leak Hunter With Smoke Cone Cap Plugs Kit -23133103

The Vac-leak hunter diagnostic tool supports the following systems: Intake System, Exhaust System, Cooling System, Fuel Tank System, and EVAP System.

>>Protection system: RhinoTuning Vac-leak hunter smoke tester is equipped with temperature control protection. If the temperature is higher than the predetermined setting, it will automatically shut down to avoid accidents.

>>Built-in air pump: The automotive smoke machine Vac-Leak Hunter is easy to operate. Connect to a 12V car battery, import Baby oil or Special oil for the testing machine, then turn it on. General smoke in 3 seconds

>>Strong compatibility: RhinoTuning smoke machine can be used to detect leaks in piping systems on cars, motorcycles, snowmobiles, off-road vehicles, ATVs, light trucks, and speedboats.

>>Return Warranty: For damage caused by non-human factors, we promise to provide a free warranty or return within six months. If there are any queries, please contact us.

Note: Due to cross-border transportation problems, the product is not equipped with smoke oil, we recommend the following oil products:
1. Baby oil
2. Special oil for testing machine

The machine is designed to perform best under a DC voltage of around 12.5v (A lot of smoke will be produced in the range of 12.05v-12.95V). Therefore, it is recommended to keep the DC voltage above 12.29V when starting up.
【Description】

【Package】

Notice:
1. When using, please make sure that the machine contains smoke oil, and use professional smoke oil to avoid damage to the machine.
2. Although the smoke is harmless to the human body, please avoid inhaling too much smoke when using it.
3. Please lay the machine flat with the oil injection port facing upwards, so that the e-liquid is heated evenly.
4. This machine can withstand a 12V power supply. High voltage can damage the machine and even cause an accident.
5. Please keep away from smoke-sensitive parts for leak detection
6. Use the tester only when the vehicle engine is off.
7. Please try to run the machine within 10 minutes for each test, with an interval of 5-10 minutes, to avoid high-temperature operation
8. If there is any problem during the use of the machine, please contact us for help.