RhinoTuning 67mm Floating Wheel Center Caps for Rays, Enkei & XXR – 4PCS

RhinoTuning Floating Wheel Center Caps – 67mm Self-Leveling Caps (Set of 4)

RhinoTuning floating wheel center caps provide a distinctive finishing touch for compatible aftermarket wheels. Designed with a 67mm nominal outer diameter and an independently moving floating center mechanism, these replacement wheel center caps offer a stylish alternative to conventional fixed center caps.

Whether you’re refreshing compatible Rays ZE40 wheels, upgrading an Enkei RPF1 setup, or looking for replacement floating center caps for select XXR, TE37, Rota, or Ford F-150 wheel applications, this four-piece set combines custom styling with practical fitment dimensions.

With an approximately 66.5mm (2.62-inch) outer diameter and 63mm (2.48-inch) clip mounting diameter, these floating wheel center caps are intended for wheels that use matching retention configurations.

Why Choose RhinoTuning 67mm Floating Wheel Center Caps?

1. Distinctive Self-Leveling Floating Design

Traditional fixed center caps rotate directly with the wheel. Floating center caps feature a separate center mechanism designed to help the emblem maintain its orientation as the wheel turns.

This creates a distinctive custom appearance for compatible alloy wheels and gives the wheel center a more noticeable finishing detail.

2. Custom Styling for Aftermarket Wheels

Give your wheels a refreshed appearance without replacing the entire wheel setup.

These 67mm floating center caps provide a simple cosmetic upgrade for compatible performance-inspired and customized aftermarket wheels.

3. Designed for Compatible Rays, Enkei, and XXR Wheel Applications

These RhinoTuning floating wheel center caps are listed for several popular aftermarket wheel families, including select Rays ZE40, Enkei RPF1, and XXR 530/557 configurations.

Fitment depends on the specific wheel’s center opening, mounting depth, and retention design rather than brand or model name alone.

4. 67mm Outer Diameter with 63mm Mounting Clips

The listed outer diameter of approximately 66.5mm and clip mounting diameter of approximately 63mm provide useful measurements when comparing replacement center caps.

Always verify these dimensions against your original wheel caps to reduce the risk of ordering an incompatible replacement.

5. Complete Set of Four

Each package contains four matching floating center caps, allowing you to refresh the appearance of four compatible wheels with a consistent design.

Compatible Wheel Applications

These aftermarket floating wheel center caps are intended for select wheel configurations using compatible mounting dimensions.

Potential applications include:

• Rays ZE40: Select compatible aftermarket wheel configurations

• Enkei RPF1: Wheels with matching center cap openings and mounting clips

• XXR 530: Select compatible wheel applications

• XXR 557: Compatible mounting configurations

• Rays TE37 Tokyo Time Attack: Select applications with matching cap dimensions

• Rota G-Force 17-inch wheels: Compatible configurations only

• Ford F-150 18-inch wheels: Select wheel configurations with matching mounting specifications

Fitment Disclaimer: These applications are based on the product’s listed compatibility information. Not all versions of these wheels necessarily use the same center cap design. Always compare your original wheel center cap dimensions before purchasing.

RhinoTuning 67mm Floating Center Cap Specifications

Note: Confirm the rear clip configuration, cap height, emblem material, and any finish options against your original product specifications or physical inventory before publishing additional technical details.

How to Measure Your Wheel Center Caps Before Ordering

Correct measurements are essential for selecting replacement floating center caps that fit securely.

Step 1: Measure the Outer Diameter

Remove an original center cap and measure its full outside face diameter.

These RhinoTuning floating wheel center caps have a listed outer diameter of approximately 66.5mm and are commonly marketed as 67mm caps.

Step 2: Check the Clip Mounting Diameter

Measure across the retention clips on the back of your original center cap.

The listed clip mounting diameter for this product is 63mm.

Step 3: Verify the Mounting Depth

Compare the height and depth of your existing cap with the replacement before ordering.

Floating center caps contain an additional moving center mechanism, so clearance behind the wheel opening should also be checked.

Step 4: Compare the Retention Clip Design

Ensure the new center cap uses a compatible snap-in retention mechanism.

Even if two center caps share the same outside diameter, differences in clip shape, spacing, or mounting depth can prevent proper installation.

Step 5: Confirm Compatibility

Check all available measurements before purchasing.

Do not rely solely on the vehicle make, wheel model, or nominal 67mm size when determining fitment.

Refresh Your Wheels with 67mm Floating Center Caps

The right wheel accessories can make a noticeable difference to the overall appearance of your vehicle.

Whether you’re updating a custom street build, replacing existing caps, or refreshing a compatible aftermarket wheel setup, these 67mm self-leveling floating center caps offer an attractive way to enhance your wheel styling.

Designed for wheel applications with matching dimensions, this four-piece set combines a distinctive floating center effect with a coordinated appearance.

Shop RhinoTuning floating wheel center caps at American Wheels Company and complete your wheel styling with a distinctive 67mm floating design.

Frequently Asked Questions (FAQs)

1. What size are these RhinoTuning floating wheel center caps?

These RhinoTuning floating wheel center caps have a nominal outer diameter of 67mm, an approximate actual outer diameter of 66.5mm (2.62 inches), and a listed 63mm (2.48 inches) clip mounting diameter.

Check your original center caps to confirm fitment before ordering.

2. Will these 67mm floating center caps fit Rays ZE40 wheels?

These floating center caps are listed for select Rays ZE40 wheel configurations.

However, not every Rays ZE40 wheel necessarily uses the same mounting dimensions. Check the original center cap’s outer diameter, mounting clips, and depth before purchasing.

3. Are these floating center caps compatible with Enkei RPF1 wheels?

These 67mm floating center caps are intended for certain Enkei RPF1 wheel applications with matching center openings and mounting dimensions.

Compatibility depends on the specific wheel configuration. Matching the Enkei RPF1 model name alone does not guarantee proper fitment.

4. Can I use these floating center caps on XXR 530 and XXR 557 wheels?

The product is listed for select XXR 530 and XXR 557 wheel configurations.

Verify your existing center cap’s dimensions and retention mechanism before ordering.

5. What is the difference between floating and regular wheel center caps?

Regular wheel center caps rotate with the wheel.

Floating wheel center caps have a separate moving center assembly designed to help the emblem maintain its orientation while the wheel rotates.

This creates a distinctive customized appearance.

6. How many floating wheel center caps are included?

Each package includes four matching floating wheel center caps, intended for four compatible wheels.

7. Will these center caps fit Ford F-150 18-inch wheels?

These floating wheel center caps are listed for select Ford F-150 18-inch wheel configurations.

They are not universal Ford F-150 replacements. Always verify the original cap’s measurements, mounting system, and available clearance.

8. Can these floating center caps fit Rays TE37 wheels?

These center caps are listed for select TE37 Tokyo Time Attack wheel applications.

Fitment depends on the wheel’s center opening, clip mounting diameter, and retention design. Measure the original center caps before ordering.

9. What is the difference between 67mm outer diameter and 63mm clip diameter?

The 67mm nominal outer diameter refers to the approximate outside face size of the center cap.

The 63mm clip mounting diameter describes the mounting measurement across the retaining clips.

Both measurements are important when choosing replacement center caps.

10. Are these floating wheel center caps universal?

No. Although they are listed for several aftermarket wheel models, these floating center caps are not universal.

Different wheels may use different cap diameters, mounting depths, and retention clips.

Check the exact measurements of your existing caps before purchasing.

11. Can I install these floating center caps myself?

If the replacement caps match your existing wheel’s mounting system, installation may be straightforward.

Carefully remove the old center caps, clean the wheel’s center opening, align the replacement clips, and press each cap evenly into place.

Check that the caps are properly seated and securely retained before driving. Never force a cap into an incompatible opening.

12. Are these genuine Rays, Enkei, or Ford OEM center caps?

These products are aftermarket RhinoTuning floating wheel center caps described for compatible wheel applications.

References to Rays, Enkei, XXR, Rota, and Ford are provided for compatibility identification only and do not indicate that the products are genuine OEM parts or officially endorsed by those manufacturers.